Controlling local thermal gradients at molecular scales with Janus nanoheaters.

The generation and control of heat transport with nanoparticles is an essential objective of thermoplasmonics. Janus nanoparticles consisting of dissimilar materials with contrasting interfacial Kapitza conductance provide a route to control heat transport at the nanoscale. Here we use the recently introduced Atomistic Nodal Approach to map the surface temperature and Kapitza conductance of Janus nanoparticles to individual atoms. We show that the transition in the thermal transport properties between the hydrophobic and hydrophilic interfaces is exceptionally abrupt, occurring over length scales below 1 nm. We demonstrate the generality of this result using coarse-grained and all-atom models of gold nanoparticles. Further, we show how this behaviour provides a route to sustain significant temperature differences, on the order of tens of degrees for μW heat rates, between adjacent molecular layers attached to heated gold nanoparticles. Our work provides fundamental insight into nanoscale heat transport and a principle to design heterogeneous Janus nanoparticles for thermal transport applications

Improving the design of the curved rocker shoe for people with diabetes

IntroductionFoot ulceration and re-ulceration are a serious problem in people with diabetes as the outcome can be lower limb amputation, reducing quality of life and increasing mortality. The pathogenesis of foot ulceration is multifactorial with neuropathy, alterations in foot structure, callus formation and increased plantar foot pressure. The most effective intervention for reducing plantar pressure is the curved rocker outsole. To date this design has been prescribed from clinical intuition rather than scientific evidence. Therefore the studies within this thesis aimed to improve our understanding of how to best to design, and also prescribe, a rocker sole. MethodsEthical approval was obtained from the University of Salford and the NHS. Study 1 investigated the independent effect of varying the three outsole design features (apex angle, apex position and rocker angle) on plantar pressure in 24 people with diabetes and healthy participants. In-shoe pressure data was collected using Pedar-x and analysed using Matlab. Study 2 investigated the effect of varying apex position in combination with rocker angle, in 87 people with diabetes, and aimed to establish how many people would receive sufficient offloading when wearing a pre-defined rocker design. Study 3 investigated a new method of prescribing a rocker sole using artificial neural networks with an input of gait variables on 78 people with diabetes. Gait data was collected using Vicon and analysed using Visual-3D and Matlab. ResultsThe results of Study 1 suggested that fixing apex angle at 95° would be a suitable compromise to offload the high risk areas (medial forefoot). It also suggested that apex position and rocker angle needed more investigation. Therefore, in Study 2 the combined effect of two rocker angles and four apex positions were investigated. Despite some inter-subject variability, this study showed that over 60% of participants received sufficient offloading when walking in a mean optimal design. Furthermore, over 60% of people received sufficient offloading with the smaller rocker angle of 15°. The results in Study 3 showed there was low accuracy when predicting an individual optimal shoe using gait variables as inputs (34-49%). ConclusionsThis project has shown it is possible to significantly reduce plantar pressures in people with diabetes with a well-designed rocker shoe (95° apex angle, individual apex position and 15° rocker angle). This finding paves the way for future clinical trials which could provide robust clinical evidence for the use of rocker shoes

Breeding ground correlates of the distribution and decline of the Common Cuckoo Cuculus canorus at two spatial scales

This is the author accepted manuscript. The final version is available from the publisher via the DOI in this recordMany migratory bird species are undergoing population declines as a result of potentially multiple, interacting mechanisms. Understanding the environmental associations of spatial variation in population change can help tease out the likely mechanisms involved. Common Cuckoo Cuculus canorus populations have declined by 69% in England but increased by 33% in Scotland. The declines have mainly occurred in lowland agricultural landscapes, but their mechanisms are unknown. At both the local scale within the county of Devon (SE England) and at the national (UK) scale, we analysed the breeding season distribution of Cuckoos in relation to habitat variation, the abundance of host species and the abundance of moth species whose caterpillars are a key food of adult Cuckoos. At the local scale, we found that Cuckoos were more likely to be detected in areas with more semi-natural habitat, more Meadow Pipits Anthus pratensis (but fewer Dunnocks Prunella modularis) and where, later in the summer, higher numbers of moths were captured whose larvae are Cuckoo prey. Nationally, Cuckoos have become more associated with upland heath characterized by the presence of Meadow Pipit hosts, and with wetland habitats occupied by Eurasian Reed Warbler Acrocephalus scirpaceus hosts. The core distribution of Cuckoos has shifted from south to north within the UK. By the end of 2009, the abundance of macro-moth species identified as prey had also declined four times faster than that of species not known to be taken by Cuckoos. The abundance of these moths has shown the sharpest declines in grassland, arable and woodland habitats and has increased in semi-natural habitats (heaths and rough grassland). Our study suggests that Cuckoos are likely to remain a very scarce bird in lowland agricultural landscapes without large-scale changes in agricultural practices.Biotechnology and Biological Sciences Research Council (BBSRC)Royal Society for the Protection of Birds and Natural Englan

Probing microwave fields and enabling in-situ experiments in a transmission electron microscope.

A technique is presented whereby the performance of a microwave device is evaluated by mapping local field distributions using Lorentz transmission electron microscopy (L-TEM). We demonstrate the method by measuring the polarisation state of the electromagnetic fields produced by a microstrip waveguide as a function of its gigahertz operating frequency. The forward and backward propagating electromagnetic fields produced by the waveguide, in a specimen-free experiment, exert Lorentz forces on the propagating electron beam. Importantly, in addition to the mapping of dynamic fields, this novel method allows detection of effects of microwave fields on specimens, such as observing ferromagnetic materials at resonance

Extensive complement-dependent enhancement of HIV-1 by autologous non-neutralising antibodies at early stages of infection

Background: Non-neutralising antibodies to the envelope glycoprotein are elicited during acute HIV-1 infection and are abundant throughout the course of disease progression. Although these antibodies appear to have negligible effects on HIV-1 infection when assayed in standard neutralisation assays, they have the potential to exert either inhibitory or enhancing effects through interactions with complement and/or Fc receptors. Here we report that non-neutralising antibodies produced early in response to HIV-1 infection can enhance viral infectivity.Results: We investigated this complement-mediated antibody-dependent enhancement (C'-ADE) of early HIV infection by carrying out longitudinal studies with primary viruses and autologous sera derived sequentially from recently infected individuals, using a T cell line naturally expressing the complement receptor 2 (CR2; CD21). The C'-ADE was consistently observed and in some cases achieved infection-enhancing levels of greater than 350-fold, converting a low-level infection to a highly destructive one. C'-ADE activity declined as a neutralising response to the early virus emerged, but later virus isolates that had escaped the neutralising response demonstrated an increased capacity for enhanced infection by autologous antibodies. Moreover, sera with autologous enhancing activity were capable of C'ADE of heterologous viral isolates, suggesting the targeting of conserved epitopes on the envelope glycoprotein. Ectopic expression of CR2 on cell lines expressing HIV-1 receptors was sufficient to render them sensitive to C'ADE.Conclusions: Taken together, these results suggest that non-neutralising antibodies to the HIV-1 envelope that arise during acute infection are not 'passive', but in concert with complement and complement receptors may have consequences for HIV-1 dissemination and pathogenesis

Optimisation of rocker sole footwear for prevention of first plantar ulcer : comparison of group-optimised and individually-selected footwear designs

Background: Appropriate footwear for individuals with diabetes but no ulceration history could reduce the risk of first ulceration. However, individuals who deem themselves at low risk are unlikely to seek out bespoke footwear which is personalised. Therefore, our primary aim was to investigate whether group-optimised footwear designs, which could be prefabricated and delivered in a retail setting, could achieve appropriate pressure reduction, or whether footwear selection must be on a patient-by-patient basis. A second aim was to compare responses to footwear design between healthy participants and people with diabetes in order to understand the transferability of previous footwear research, performed in healthy populations.Methods: Plantar pressures were recorded from 102 individuals with diabetes, considered at low risk of ulceration. This cohort included 17 individuals with peripheral neuropathy. We also collected data from 66 healthy controls. Each participant walked in 8 rocker shoe designs (4 apex positions × 2 rocker angles). ANOVA analysis was then used to understand the effect of two design features and descriptive statistics used to identify the group optimised design. Using 200 kPa as a target, this group-optimised design was then compared to the design identified as the best for each participant (using plantar pressure data).Results: Peak plantar pressure increased significantly as apex position was moved distally and rocker angle reduced (p < 0.001). The group-optimised design incorporated an apex at 52% of shoe length, a 20° rocker angle and an apex angle of 95°. With this design 71–81% of peak pressures were below the 200 kPa threshold, both in the full cohort of individuals with diabetes and also in the neuropathic subgroup. Importantly, only small increases (<5%) in this proportion were observed when participants wore footwear which was individually selected. In terms of optimised footwear designs, healthy participants demonstrated the same response as participants with diabetes, despite having lower plantar pressures.Conclusions: This is the first study demonstrating that a group optimised, generic rocker shoe might perform almost as well as footwear selected on a patient by patient basis in a low risk patient group. This work provides a starting point for clinical evaluation of generic versus personalised pressure reducing footwear

Time preferences and risk aversion: tests on domain differences

The design and evaluation of environmental policy requires the incorporation of time and risk elements as many environmental outcomes extend over long time periods and involve a large degree of uncertainty. Understanding how individuals discount and evaluate risks with respect to environmental outcomes is a prime component in designing effective environmental policy to address issues of environmental sustainability, such as climate change. Our objective in this study is to investigate whether subjects' time preferences and risk aversion across the monetary domain and the environmental domain differ. Crucially, our experimental design is incentivized: in the monetary domain, time preferences and risk aversion are elicited with real monetary payoffs, whereas in the environmental domain, we elicit time preferences and risk aversion using real (bee-friendly) plants. We find that subjects' time preferences are not significantly different across the monetary and environmental domains. In contrast, subjects' risk aversion is significantly different across the two domains. More specifically, subjects (men and women) exhibit a higher degree of risk aversion in the environmental domain relative to the monetary domain. Finally, we corroborate earlier results, which document that women are more risk averse than men in the monetary domain. We show this finding to, also, hold in the environmental domain